Volume 7, Issue 3, September 2019, Page: 64-70
A Feasibility Study on GFRP Tubular Concrete Column Damage Detection Using Piezoceramic-transducer-enabled Active Sensing
Cai Gaojie, School of Urban Construction, Yangtze University, Jingzhou, China
She Yanhua, School of Urban Construction, Yangtze University, Jingzhou, China
Received: Nov. 3, 2019;       Published: Dec. 3, 2019
DOI: 10.11648/j.ajma.20190703.15      View  745      Downloads  191
Aiming at the crack damage of concrete in GFRP tubular concrete column, a method based on piezoelectric wave method was developed to monitor the crack damage. By transmitting and receiving stress waves from a pair of piezoelectric ceramic sensors embedded in GFRP tubular concrete, the damage degree of GFRP tubular concrete columns was evaluated by using wavelet packets to obtain the stress wave energy and damage index under different load levels. By analyzing the change of stress wave energy and damage index of concrete with different strength under different loads, the time-domain signal response, load-energy curve and load-damage index curve were obtained. In this test, four test pieces were designed according to different concrete strength grades. Two piezoelectric ceramic sensors were placed in the test piece and used to monitor the test piece under static loading. After the static loading was completed, the GFRP tube was severely broken and peeled off from the concrete. A large number of cracks appeared on the concrete surface. The results show that: The test results were consistent with the actual damage of the specimen. The development trend of concrete damage in GFRP tubular concrete columns was well revealed by the wave method.
Concrete Damage Detection, Active Sensing Approach, Piezoelectric Transducer, Wavelet-packet-based Damage Index
To cite this article
Cai Gaojie, She Yanhua, A Feasibility Study on GFRP Tubular Concrete Column Damage Detection Using Piezoceramic-transducer-enabled Active Sensing, American Journal of Mechanics and Applications. Vol. 7, No. 3, 2019, pp. 64-70. doi: 10.11648/j.ajma.20190703.15
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
G. Song, C. Wang, B. Wang, "Structural Health Monitoring (SHM) of Civil Structures." Appl. Sci. 2017, 7, pp. 789.
Y. Yang, B. S. Divsholi, C. K. Soh, "A reusable PZT transducer for monitoring initial hydration and structural health of concrete." Sensors 2010, 10, pp. 5193–5208.
S. Yan, H. Ma, P. Li, G. Song, J. Wu, "Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates." Sensors 2017, 17, pp. 1641.
W. H. Duan, Q. Wang, S. T. Quek, "Applications of piezoelectric materials in structural health monitoring and repair: Selected research examples." Materials 2010, 3, pp. 5169–5194.
D. Broda, W. J. Staszewski, A. Martowicz, T. Uhl, V. V.Silberschmidt, "Modelling of nonlinear crack–wave interactions for damage detection based on ultrasound—A review." J. Sound Vib. 2014, 333, pp. 1097–1118.
X. Hu, H. Zhu, D. Wang, "A study of concrete slab damage detection based on the electromechanical impedance method." Sensors 2014, 14, pp. 19897–19909.
C. Yu and L. Ping, "Piezoelectric-ceramic-embedded smart concrete module for structure health monitory." SENSORS, 2009 IEEE, 2009.
J. Shao, T. Wang, H. Yin, D. Yang, Y. Li, "Bolt looseness detection based on piezoelectric impedance frequency shift. " Appl. Sci. 2016, 6, pp. 298.
D. Zou, T. Liu, C. Liang, Y. Huang, F. Zhang, C. Du, "An experimental investigation on the health monitoring of concrete structures using piezoelectric transducers at various environmental temperatures." J. Intell. Mater. Syst. Struct. 2015, 26, pp. 1028–1034.
D. Zou, T. Liu, G. Qiao, Y. Huang, B. Li, "An experimental study on the performance of piezoceramic-based smart aggregate in water environment." IEEE Sens. J. 2014, 14, pp. 943–944.
D. Wang, H. Song, H. Zhu, "Embedded 3D electromechanical impedance model for strength monitoring of concrete using a PZT transducer." Smart Mater. Struct. 2014, 23, pp. 115019.
D. Wang, J. Zhang, H. Zhu, "Embedded electromechanical impedance and strain sensors for health monitoring of a concrete bridge." Shock Vib. 2015, 2015, pp. 821395.
G. Song, X. Zhou, W. Binienda, "Thermal deformation compensation of a composite beam using piezoelectric actuators. Smart Mater." Struct. 2003, 13, pp. 30.
G. Song, C. Olmi and H. Gu, "An overheight vehicle–bridge collision monitoring system using piezoelectric transducers." Smart Materials and Structures 16.2 (2007), pp. 462-468.
S. X. Xiao, et al, "Multiscale Analysis of Concrete Damage and Crack Propagation Under High Cycle Loading." International Journal of Computational Methods (2018), pp. 1844007.
R. Huang, et al, "The Acoustic Directivity and Energy Research of Piezoelectric Ceramic Wafer Embedded in Concrete." Chinese Journal of Sensors and Actuators 24.9 (2011), pp. 1270-1274.
Z. X. Yan, et al, "Concrete structure monitoring based on built-in piezoelectric ceramic transducers." Proceedings of SPIE - The International Society for Optical Engineering 6932 (2008), pp. 693208-693208-8.
J. C. Zhang, Y. S. Huang, Y. Zheng, "A Feasibility Study on Timber Damage Detection Using Piezoceramic-Transducer-Enabled Active Sensing." Sensors 2018, 18, pp. 1563.
Browse journals by subject